Manage the Stand by mode in the Smart Push-Pull
Smart Push-Pull Stand by
The auto standby function is available in the smart push-pull flashlight from machine firmware version 1.1.1.110 or later and p&P firmware version 1.2.2.5 or later.
BEFORE
NOW
Step 1: to directly access the “Advanced Settings” menu, press the gear button at the bottom right of the display on the main screen.
step 2: Scroll through the “Advanced Settings” menu and select “Plug & Play and Accessories”.
step 3: scroll through the menu and select Push Pull.
NOTE: If you activate Autostandby after 10 seconds the push-pull buttons are not pressed, the torch buttons will be blocked to avoid unwanted commands.
Step 4: the auto stand by function can be activated/deactivated using the switch on the Push Pull screen
NOTE: To exit the lockout condition, press the “M” button for 3 seconds.
